LA-7010 plastic-plastic dry lamination adhesive glue

LA-7010 plastic-plastic dry lamination adhesive glue acrylic adhesive soft packaging acrylic emulsion robond rohm and haas

LA-7010 plastic-plastic dry lamination adhesive glueacrylic adhesivesoft packagingwater acrylic emulsionrobond rohm and haas substitute

Features

1.  water based acylic adhesive glue, non-toxic ,environment friendly.

2.  one-component, easy to use, high peeling strength, good transparency, you can slit soon when it is laminated, suitable for high-speed coating line, economical.

3.  suitable for all kinds of substrate (BOPP,CPP,PE or paper), also suitable for both water based and solvent based ink.

4.  dried glue amount 1.0-3.0g per squaremeter , laminating temperature 65-85°C

Technical parameter

Solid content(m/m%):40.0-42.0

PH:6.5-7.5

Tg (°C): -23

viscosity(mPa.S):  50-300

application:soft packaging for all kinds of food, or for non-food plastic film with Aluminized film / printing film

Instrutions

1.       This glue is dry lamination glue, which don’t need to add water or other solvent when using,if you want to dilut it, please use deionized water.2.       Before using, you’d better rabbling the glue in the bucket for 5 to 10 minutes, which can make sure all agents mixed well in it.3.       Users should make sure there is no lest glue on the lamination machine when first use, especially if you use solvent based glue before, say glue container, glue roller, adjusting roller,scrapper.etc.4.       The requirment about lamination base material: pp film surface tension  38dyn/cm, pe film surface tension  52dyn/cm

LA-7010 plastic-plastic dry lamination adhesive glue